X
Advantages
Applications
Product range
Performances

KN 166 II & KN 166 A&T are a selective glass with advanced sun protection, ensuring at the same time, excellent thermal insulation and a high level of natural light.


The coating is applied to PLANICLEAR by cathodic sputtering under vacuum conditions.


COOL-LITE® KN 166 II is the "to be tempered" product, that must necessarily be heat treated (tempered or heat strengthened) to be put in work. It has a better selectivity and 'state-of-art' Ug-value.

COOL-LITE® KN 166 A&T can be used annealed or tempered, but not mixed on the same façade. KN 166 A&T tempered product is matchable with KN 166 II and can be used on the same building.

KN 166 A&T annealed has different performances and aesthetics and it cannot be mixed with tempered KN 166 A&T or KN 166 II.


Due to its very low solar factor, it reduces cooling loads, reduces the cost of air conditioning, is more eco-friendly, as it reduces the use of primary energy and associated CO² emissions.


Its advanced thermal insulation achieves a Ug-value of 1.0 W/m²K (1.1 W/m²K annealed) in a standard IGU with 16mm Argon filled cavity, which is the best in this category of coatings. It results in an excellent sun protection and high levels of natural light transmission.


Very economical as it allows downsizing the air conditioning equipment required and drastically reduces the heat losses. The solar energy that penetrates in the interior is being much smaller. This ensures a healthier work environment and economy of energy required for lighting.


Seen from outside, the glasses KN 166 II & KN 166 A&T are part of the façade of the building, giving it personality, dynamism and elegance.


KN 166 II & KN 166 A&T can be easily combined with other types of glass to add various additional functions, such as sound insulation (with STADIP SILENCE), security (with STADIP or STADIP PROTECT), etc.



COOL-LITE® KN 166 II & KN 166 A&T on PLANICLEAR are a solar and thermal insulation glass designed to optimize thermal comfort. Benefits: WINTER, SUMMER and LIGHT COMFORT Properties: Solar control coated glass and enhanced thermal insulation

TECHNICAL SUPPORT Contact
Advantages

KN 166 II & KN 166 A&T are a selective glass with advanced sun protection, ensuring at the same time, excellent thermal insulation and a high level of natural light.


The coating is applied to PLANICLEAR by cathodic sputtering under vacuum conditions.


COOL-LITE® KN 166 II is the "to be tempered" product, that must necessarily be heat treated (tempered or heat strengthened) to be put in work. It has a better selectivity and 'state-of-art' Ug-value.

COOL-LITE® KN 166 A&T can be used annealed or tempered, but not mixed on the same façade. KN 166 A&T tempered product is matchable with KN 166 II and can be used on the same building.

KN 166 A&T annealed has different performances and aesthetics and it cannot be mixed with tempered KN 166 A&T or KN 166 II.


Due to its very low solar factor, it reduces cooling loads, reduces the cost of air conditioning, is more eco-friendly, as it reduces the use of primary energy and associated CO² emissions.


Its advanced thermal insulation achieves a Ug-value of 1.0 W/m²K (1.1 W/m²K annealed) in a standard IGU with 16mm Argon filled cavity, which is the best in this category of coatings. It results in an excellent sun protection and high levels of natural light transmission.


Very economical as it allows downsizing the air conditioning equipment required and drastically reduces the heat losses. The solar energy that penetrates in the interior is being much smaller. This ensures a healthier work environment and economy of energy required for lighting.


Seen from outside, the glasses KN 166 II & KN 166 A&T are part of the façade of the building, giving it personality, dynamism and elegance.


KN 166 II & KN 166 A&T can be easily combined with other types of glass to add various additional functions, such as sound insulation (with STADIP SILENCE), security (with STADIP or STADIP PROTECT), etc.


Applications

KN 166 II & KN 166 A&T are perfectly suited for both non-residential applications and residential applications.


Due to their elegant and live appearance, they match perfectly with all types of façade, giving the building a distinctive note and dynamic at the same time.


NON-RESIDENTIAL APPLICATIONS

Mostly suitable for curtain walling façade, but can also be used for:

  • double skin,
  • skylights,
  • roofs for office building,
  • shops, etc.


It is a perfect coating for the building market which is neutral in color in reflection combined with an attractive level of reflectivity.


RESIDENTIAL APPLICATIONS

Thanks to its good performance values it is suitable for homes, villas, apartments, terraces closed, etc. and can enhance visual comfort and wellbeing of the habitants by filtering the daylight.


Product range

KN 166 II & KN 166 A&T are available in 6, 8 and 10 mm.


KN 166 II & KN 166 A&T are part of the range of KN-coatings:

  • Jumbo size (PLF): 6000 x 3210 mm
  • Split dimensions: available on request
  • Substrate: PLANICLEAR & PARSOL green
  • Thicknesses: standard 6, 8 and 10 mm; other thicknesses on demand

Performances

KN 166 II & KN 166 A&T offer many processing options:

  • Insulating glazing: must be always assembled in insulating glazing facing to cavity on face #2.
  • Thermal treatment: must be heat treated (tempered or heat strengthened) to be put in work.
  • Curving: can be curved with certain limitation.
  • Lamination: can be laminated with the coating not in contact with the PVB film, and must be heat treated before lamination.


Please contact us for detailed instructions for processing.


KN 166 II & KN 166 A&T comply with the requirements of C class, according SR EN 1096-1 and 1096-2.


CE marking: Comply with all the EU applicable guidelines and standards during the manufacturing process and therefore consistently offers products of excellent quality. Obtain the CE marking here.



Choose glass type

KN 166 II
KN 166 A&T Tempered
KN 166 A&T Annealed