X
Advantages
Applications
Product range
Performances

The COOL-LITE SKN 154 range are solar control products that feature a high performance coating. The coating can be applied to PLANICLEAR or DIAMANT float glass by cathodic sputtering under vacuum conditions.


The COOL-LITE SKN 154 / 054 glass are part of the ever-evolving range of "to be toughened" neutral solar control coatings from Saint-Gobain Glass. In order to achieve its superior thermal properties, solar control properties and neutral appearance, COOL-LITE SKN 154 / 054 must always be toughened or heat strengthened before assembly into a double-glazed unit (coating on face 2).


The “to be tempered” version COOL-LITE SKN 154 II / 054 II can be heat treated and can therefore be tempered or toughened in order to fulfill safety requirements / norms, to increase mechanical resistance and to reduce thermal breakage risk.


NOTE: Color differences may occur between annealed and heat-strengthened / tempered versions of a coating, and that it must be accepted by customers before any order.



The high selective glass COOL-LITE SKN 154 range, either on  PLANICLEAR or DIAMANT is a solar control glass.COOL-LITE SKN 154 blocks up to 72% of solar heat by reflecting it to the outside.Benefits: WINTER, SUMMER and LIGHT COMFORTProperties: High performance solar control glass with advanced thermal insulation properties and excellent neutrality

TECHNICAL SUPPORT Contact
Advantages

The COOL-LITE SKN 154 range are solar control products that feature a high performance coating. The coating can be applied to PLANICLEAR or DIAMANT float glass by cathodic sputtering under vacuum conditions.


The COOL-LITE SKN 154 / 054 glass are part of the ever-evolving range of "to be toughened" neutral solar control coatings from Saint-Gobain Glass. In order to achieve its superior thermal properties, solar control properties and neutral appearance, COOL-LITE SKN 154 / 054 must always be toughened or heat strengthened before assembly into a double-glazed unit (coating on face 2).


The “to be tempered” version COOL-LITE SKN 154 II / 054 II can be heat treated and can therefore be tempered or toughened in order to fulfill safety requirements / norms, to increase mechanical resistance and to reduce thermal breakage risk.


NOTE: Color differences may occur between annealed and heat-strengthened / tempered versions of a coating, and that it must be accepted by customers before any order.


Applications

The COOL-LITE SKN 154 range are solar control products which are primarily used in commercial buildings, either for façades, windows or overhead glazing. They are designed for use side-by-side:  COOL-LITE SKN 154/054 in annealed form and COOL-LITE SKN 154 II / 054 II in toughened/heat-strengthened form.


Due to the unique properties of the coating, it is ideally suited to applications requiring a high light transmittance, low G value and excellent neutrality.


Product range

COOL-LITE SKN 154 is designed on PLANICLEAR substrate, for annealed use. 


COOL-LITE SKN 154 II is designed on PLANICLEAR substrate, for use in either toughened or heat-strengthened form. 


COOL-LITE SKN 054 is designed on DIAMANT substrate, for annealed use. 


COOL-LITE SKN 054 II is designed on DIAMANT substrate, for use in either toughened or heat-strengthened form. 


For all of the above versions the coating is positioned on face 2 of the sealed unit.


COOL-LITE SKN 154 is part of the SKN coatings:

  • Jumbo size (PLF): 6000 x 3210 mm
  • Split dimensions: available on request
  • Substrate: PLANICLEAR &  DIAMANT flat glass
  • Thicknesses: Standard: 4, 6, 8 and 10mm & other thicknesses on demand

Performances

The COOL-LITE SKN 154 range is designed to offer exceptional solar and thermal performance:

·       Very low g-value of 0.28

·       Optimum centre-pane Ug-value of 1.0w/m2k

·       Neutral appearance both in transmission and exterior reflection

·       Good levels of natural light transmission


The  COOL-LITE SKN 154 range can be used to improve the energy efficiency of buildings by considerably reducing overheating and the need for costly air conditioning. It is particularly suited to large areas of glazing where superior solar control performance is required whilst at the same time noticeably reducing excessive heat loss.


Please contact us for detailed instructions for processing.


COOL-LITE SKN 154 / 054 / 154 II / 054 II comply with the requirements of C class, according SR EN 1096-1 and 1096-2.

CE marking: Complies with all the EU applicable guidelines and standards during the manufacturing process and therefore consistently offers products of excellent quality. Obtain the CE marking here.



Choose glass type

154
154 II
054
054 II